· By LumionVietnam
“Can this PC run Twinmotion?” is only the first question. A machine that opens a small scene and exports a 1080p clip may be a poor fit for a large landscape, VR, Lumen, or Path Tracer work. The useful buying decision starts with project data, output resolution, and rendering mode—then matches GPU memory and system RAM to that workload.

Official Twinmotion requirements at a glance
Windows baseline: Epic lists Windows 11 64-bit, or Windows 10 64-bit version 1909 revision .1350+, or versions 2004/20H2 revision .789+. These are vendor compatibility values, not advice to deploy an unsupported operating system. Use a maintained OS and check the requirement for your exact build. For RTX 5090, Epic recommends NVIDIA Studio Drivers rather than Game Ready Drivers.
Epic divides its Windows recommendations into minimum and high-end project classes. The minimum class is intended for small-to-average projects with less than 1 GB of geometry and data, local or cloud presentations, 1080p video, and images up to 4K. Epic says that tier is not suitable for VR, 4K-or-higher video, 360-degree exports, Path Tracer, or Lumen because those workflows demand more memory.
| Windows component | Official minimum | Official high-end |
|---|---|---|
| GPU | 6 GB dedicated VRAM; benchmark score 10,000+ | 12 GB dedicated VRAM; benchmark score 20,000+ |
| CPU | Benchmark score 2,000+ | Benchmark score 2,500+ |
| System RAM | 16 GB or more | 64 GB or more |
| Storage | 30 GB free disk space; Epic notes that large projects load and save faster from an SSD. | |
Epic also says to install current graphics drivers, lists DirectX 11 and DirectX 12, and notes that Intel Arc cards are not officially supported. Its page recommends at least 8 GB VRAM for Path Tracer; the high-end class specifies 12 GB VRAM. Check the current hardware page before purchasing because manufacturer support and software requirements can change.
Choose by workload—not by the word “minimum”
Light: small interiors and quick client previews
Official floor: a Windows GPU with 6 GB dedicated VRAM and a 10,000 benchmark score, CPU score of 2,000, and 16 GB RAM. Keep the project below Epic’s 1 GB geometry-and-data guideline, target 1080p video or stills up to 4K, and do not plan on VR, Lumen, Path Tracer, or 4K video exports.
Practical recommendation: aim for 8 GB VRAM and 32 GB system RAM even on an entry workstation, plus a current-generation CPU that clears Epic’s score floor. A 1 TB NVMe SSD is a comfortable project-drive starting point, not an Epic requirement. The extra headroom helps when Revit, SketchUp, or a browser is open beside Twinmotion.

Balanced: daily architectural visualization and moderate scenes
For a recurring workflow with larger imported models, vegetation, animated assets, and frequent high-resolution previews, target the high-end GPU class rather than buying exactly to the minimum. A practical editorial target is 12 GB VRAM, a GPU benchmark score around Epic’s 20,000 high-end threshold, 32–64 GB RAM, and fast SSD storage. If you rely on Lumen or repeatedly keep several large applications open, prefer 64 GB RAM. Those are buying recommendations, not separate official minimums.
Heavy: large sites, Lumen or Path Tracer, VR and high-resolution delivery
Epic’s high-end class is aimed at projects above 1 GB of geometry and data and includes large buildings, cities, and landscapes. Its published Windows tier calls for 12 GB dedicated VRAM, a 20,000 GPU benchmark score, a CPU score of 2,500, and 64 GB RAM. The Path Tracer note mentions 8 GB as a minimum recommendation, but that should not be confused with comfortable memory for a large scene. For heavy work, our practical target is a GPU with 16 GB or more VRAM, at least 64 GB RAM, and a 2 TB NVMe project SSD where budgets allow. Treat 16 GB and 2 TB as editorial recommendations, not Epic’s official thresholds.

Desktop or laptop?
A desktop is usually easier to cool, upgrade, and equip with higher-memory GPUs. For a laptop, compare the exact laptop GPU configuration and available VRAM—not only the model family printed in the product name. Sustained power and cooling matter during long exports. Prefer a chassis with credible cooling, upgradeable system RAM if possible, and enough SSD capacity for active projects; render while connected to its power supply.
macOS and version-specific caveats
Epic currently lists macOS Sonoma 14.6.1 for the Mac minimum and macOS Tahoe 26 for the high-end tier; the corresponding Xcode entries are 15.2 (15.4 recommended) and 26.4.1. Confirm these against the exact Twinmotion build before installing. The page lists 32 GB RAM for the Mac minimum and 64 GB for its high-end tier. It also documents three important limitations: Path Tracer and VR mode are not supported on Mac, and Lumen uses software ray tracing, which may affect visual quality. Starting with Twinmotion 2026.1, the page says Xcode must be installed; check the exact Xcode and macOS version listed for your installation before planning a Mac deployment.
Check your actual machine and project: a repeatable test
Use a copy of a representative project, one fixed camera, your normal render mode and the same output size on every machine. The test below is editorial methodology, not an Epic benchmark.
- Record the machine: on Windows press Ctrl+Shift+Esc, open Task Manager → Performance → GPU, and note the exact GPU and dedicated GPU memory capacity. Do not add shared system memory to dedicated VRAM. Under Performance → Memory, record installed RAM.
- Record the driver and OS: run winver for the Windows build; open Device Manager → Display adapters → your GPU → Properties → Driver for the driver version/date. Compare against the vendor download page before changing anything.
- Measure the real scene: open Twinmotion and click Stats in the footer to open Statistics. Record FPS, GPU RAM usage and the scene statistics that explain texture/geometry load. GPU RAM percentage is not the graphics card’s total capacity in gigabytes.
- Repeat a controlled view: keep camera, quality, lighting, resolution and mode unchanged. Pan through the heaviest area, then export one still at your actual delivery size. Record time, peak observed memory and any crash or missing asset; no universal pass-time is implied.
- Compare under normal conditions: repeat with your usual modeling application open. On a plugged-in laptop, repeat after a sustained export to expose thermal throttling. An empty scene or short cold run is not sufficient evidence.
- Save the evidence: keep the scene copy, exported image and a text log of machine/build/driver/settings. A successful viewport test does not prove a large final export will fit in VRAM.
Expected outcome: a reproducible record showing whether the intended project opens, remains usable and exports successfully—not a promise that a certain GPU name fits every scene. If VRAM is pressured, first inspect texture size, duplicate assets and scene scope; if system RAM is exhausted, close nonessential applications and reassess capacity. Change one variable at a time and retest.
A practical workstation check before buying
- Open the heaviest real project you expect to deliver—not an empty sample scene.
- Check project size and your target modes: standard raster, Lumen, Path Tracer, VR, 360, or high-resolution video.
- Confirm dedicated GPU VRAM, Epic’s GPU benchmark class, CPU score, installed RAM, free disk space, and current drivers.
- Test one live session while the normal BIM/modeling tools are open; watch memory use and note when proxies or reduced quality become necessary.
- On a laptop, repeat a sustained export after the machine has warmed up. A short benchmark does not show long-session thermal behavior.
When comparing ecosystems, our D5 Render system requirements guide uses a similar workload-first approach. Do not compare GPU names alone; compare the actual project, render mode, memory, and delivery target.
FAQ
Is 6 GB VRAM enough for Twinmotion?
It matches Epic’s Windows minimum GPU recommendation for small-to-average projects and basic outputs. It is not the recommended tier for Lumen, Path Tracer, VR, 360-degree work, or 4K-and-higher video.
How much RAM should an architect buy?
Epic’s published Windows minimum is 16 GB and its high-end tier is 64 GB. For a new professional workstation, 32 GB is a more comfortable editorial baseline for mixed application use; choose 64 GB for large scenes or heavy Lumen/Path Tracer work.
Can I use Twinmotion on a Mac for Path Tracer or VR?
Epic’s current documentation says Path Tracer and VR are not supported on Mac. Lumen is limited to software ray tracing there.
Official sources
- Epic Games: Twinmotion hardware and software specifications
- Epic Games: Path Tracer requirements
- Epic Games: Statistics in Twinmotion
- Hardware tiers marked “practical recommendation” are LumionVietnam editorial guidance. Verify current vendor requirements and local driver support before purchasing.




